7
Step 5
When the blood drop symbol flashes on the meter, it means that you can start
testing. You have 3 minutes to apply the blood sample. If you do not apply the
sample within 3 minutes, the meter will turn off automatically.
Obtain a Blood Sample
Sample may be obtained from finger as the following procedure:
1. Remove the end-cap of the lancing device by gently turning and pulling
straight out.
2. Insert the lancet into the lancet holder.
3. Twist and remove the protective, lancet cover to expose the sterile needle
tip.
4. Replace the end-cap back on the body of the lancing device.
5. Pull back on the cocking mechanism until it comes to a stop.
6. Place the lancing device firmly against the sample site and press the
release button.
7. After sampling, remove the end-cap containing the used lancet.
8. Remove the lancet from the lancing device. Discard the used lancet
properly in accordance with local, state, and federal law.
Step 6
Pick up the meter and use the most comfortable way to touch the blood drop to
the edge of the test strip. The blood will be sucked into the test strip
automatically.
Step 7
As soon as enough blood has filled the confirmation window of the Test Strip,
you will hear a beep letting you know the test has begun. Countdown 5
