Anderson RB-400, Руководство оператора

Страница: 23 / 52

21
7 Troubleshooting: Problems and Solutions
Before calling a technician, examine your machine and consult the table below to find a
solution. If you are still not able to solve the problem yourself, ask for help from the customer
service department of your agricultural dealer.
Troubleshooting Table
Problems Possible Causes Solutions
1. The IG-C3
counter does not turn
on.
Lack of power.
Install the provided AC/DC charger
or the charge wire on the module.
2. The IG-C3
counter turns on but
does not count
revolutions.
Defective sensor or problem with
wiring or connections.
Check the wiring and connections,
replace the sensor if necessary.
3. The turntable does
not turn or turns slowly.
The level of hydraulic oil or the flow
rate of the hydraulic unit and the
tractor is too low
Check for oil leaks and breaks.
Retighten or repair as necessary.
Add hydraulic oil to the tank.
Check the tractor’s flow rate (8
GPM).
4. The plastic film
wrapping is
unsatisfactory.
The plastic film breaks, develops
holes, or tears during wrapping.
Check if the roll installed was
damaged to begin with and
replace it if necessary.
Check if hay or something else is
inhibiting or blocking the plastic
film stretcher. Remove the object
and clean the film stretcher. Check
if all the rollers are turning freely.
The film is too soft because is has
been in the sun for too long before
being used. Install a cooler roll.
The plastic film is not tight enough
on the bale.
Check if the plastic film roll is
properly installed.
Check if the parts of the plastic
film stretcher are in good condition
and turn freely. Repair as needed.