Anderson RB-400, Руководство оператора

Страница: 22 / 52

20
Cleaning and Other Maintenance
Pay particular attention to the cleanliness of the plastic film cutter system. An accumulation of
debris (hay, dust, string, etc.) can reduce its functionality. Regularly check the cutting condition
of the blade.
Always keep the rollers and the gears of the plastic film stretcher free of all residue to prevent
these parts from jamming, breaking, or tearing the plastic film. As necessary, wash the
aluminium rollers with rubbing alcohol, penetrating oil, or paint thinner.
Also remove the hay that can get stuck in the axles and gears of the machine to not place
needless strain on the hydraulic engines.
For the maintenance of the hydraulic unit, we recommend that you follow the Honda instruction
manual for the maintenance of your engine. Check the oil level of the HONDA engine on each
day of operation. The engine air filter must be checked each time you begin wrapping and
cleaned as needed. As for changing the hydraulic oil, filter, and strainer, we recommend that
you perform this maintenance every 5000 wrappings. It is a good idea to free the area around
the gasoline engine of all flammable material.
Storage
To unhitch the machine, follow these steps:
Warning !
During unhitching operations, the operator is the only person authorized
to be near the machine.
Before lowering the tractor to remove the hydraulic connections, and
the electric cables, the operator must ensure that the machine is fully
on the ground and stable. S/he must also engage the hand brake, turn
off the tractor, and remove the key from the ignition switch.
-
Secure the machine in a stable location.
-
Use chocks to prevent the machine from moving while being unhitched from the tractor.
-
Disconnect the hydraulic connections from the tractor.
-
Disconnect the power cables.
-
Remove the fixing pin and the security chain to rotate the jack.
-
Replace the fixing pin and the security chain.
-
Lift the pole with the jack.
-
Remove the fixing pin and the security chain.
Warning !
Ensure that you have released the hydraulic pressure from the tractor’s
system to make disconnection and future reconnection easier.
-
Remove the bale counter and store in a dry place.
It is preferable to keep the machine in a dry, covered place so that it will be in good condition
when it is used again.