6
i
VIEW
1.
To attach window handle, located
in window handle kit (Q), first lower
venting window so pre-drilled holes
are at a comfortable working height.
2.
Align holes in window handle and
ventilating window frame, secure
with two 3/4" screws (provided in
window handle kit).
f
INSTALL RAIN CAP
EXTENDER, SCREW
COVERS, & WINDOW
HANDLE
(Left Hand)
5
L
If necessary, adjust the sweep (G).
1.
If there is a gap between sweep fins and
door sill or if the sweep fins bind on door
sill when opening, adjust the sweep.
2.
From interior of the panel, loosen the
sweep screws with a phillips screw driver.
Adjust the sweep up or down until the
sweep fins lightly come into contact with
the door sill.
3.
Retighten the sweep screws.
e
DOOR SILL
SWEEP
i
VIEW
G
C
1.
If there is a gap above your door, you will
need to install the rain cap extender (C).
If not needed, dispose of properly and skip
to step 5c.
2.
Place the rain cap extender over the rain cap
as shown, with both ends centered over the
rain cap.
1.
Using 1/8" drill bit, drill holes in brickmould
through holes in rain cap extender.
2.
Fasten the rain cap extender to the mounting
surface using three 1" screws. Do not
overtighten screws.
NOTE:
Be careful not to hit rain cap with drill
driver.
1.
Install screw covers (L) into side rails and
rain cap extender (if installed). Insert side
of screw cover into the side of the screw
track. Press on other side to snap it into
screw track. Make sure they snap the entire
length of the channel.
a
b
c
X
VIEW
d
1.
Install end covers into rain cap. Pressing round
button down on end cover (N), slide end cover
into rain cap until it is secured.
2.
Repeat for other side.
N
Q
Tools needed:
(optional)
!
!
1/2”
1/2”
1/2”
1”
1 1/2”
2”
1 1/2”
5/8”
5/8”
1/8"
!
!
1/2”
1/2”
1/2”
1”
1 1/2”
2”
1 1/2”
5/8”
5/8”
1"
x 3
#8
#10
#12
#6
3/4” Machine Pan Painted
1/2” SMS Pan
1/2” SMS Pan Painted
1/2” SMS Flathead
1/2” Self-Drill Pan
1/2” Self-Drill Pan Painted
3/4” Machine Flathead
7/8” Machine Pan Painted
1” SMS Pan
1” SMS Pan Painted
1” Machine Pan Painted
1-1/2” Machine Flathead
1-1/2” Machine Flathead
2” SMS Pan Painted
5/8” SMS Pan Painted
1-1/4” SMS Pan
Rain Cap Extender
(optional)
Screw
Covers
End
Cover
Handle
Kit
SWEEP FINS
OPTIONAL
OPTIONAL
L
L
C
N
Q
