AND Weighing Indicator AD-4401, Инструкция по эксплуатации

Страница: 38 / 90

36
11. When the discharging valve close wait timer completes the set time, the discharging output signal is turned off.
12. When the Batch Start input signal for the next cycle is input;
• The Batch Finish output signal is turned off.
• The judgment result output signal (overlimit or underlimit) is turned off.
• Now, the weighing sequence has cycled and restarts from Step 2 at this time.
Note: In the case of built-in-automatic program mode batching, the setpoint data is held until batch finish since start of
batching. Therefore, a setpoint altered during loading takes effect after batch finish is output.