AND UA-767S, Инструкция по эксплуатации

Страница: 17 / 292

English 15
Measurements
Measurement with the Desired Systolic Pressure
The UA-767S-W is designed to detect the pulse and to inflate the cuff to a
systolic pressure level automatically.
Use this method when re-inflation occurs repeatedly or when the results
are not displayed even if the pressure decreases to 20 mmHg or less.
1. Place the cuff on the arm at heart level
(preferably the left arm).
2. Press the
START
button.
3. When the zero blinks, press and hold
the
START
button until a number
about 30 to 40 mmHg higher than
your expected systolic pressure
appears.
4. When the desired number is reached,
release the
START
button to start
measurement. Continue to measure
your blood pressure as described on
the previous page.
Notes for Accurate Measurement
Sit down in a comfortable position. Place your arm on a table with your
palm facing upward and the cuff at the same level as your heart.
Relax for about five to ten minutes before taking a measurement. If you
are excited or depressed by emotional stress, the measurement will
reflect this stress as a higher (or lower) than normal blood pressure
reading and the pulse reading will usually be faster than normal.
An individual's blood pressure varies constantly, depending on what you
are doing and what you have eaten. What you drink can have a very
strong and rapid effect on your blood pressure.
This device bases its measurements on the heartbeat. If you have a very
weak or irregular heartbeat, the device may have difficulty determining
your blood pressure.
Should the device detect a condition that is abnormal, it will stop the measurement
and display an error symbol. Refer to page 7 for the description of symbols.
Refer to the previous page
for measurement
Press the
button
At heart level
Release the button
at the desired
systolic pressure
Press and hold
the button
START
START