2.4.3
Printer options
Quickprint
Quickprint prints out the values during measurement without any other prompts.
⇒
Press the
key during measurement.
Evaluation print-out
This option prints out the values during measurement without any other prompts.
⇒
Press the
key during measurement.
P: Print
E: Measurement
If the evaluation proves positive, select the
key
If the evaluation proves negative, repeat the measurement
with the
key.
Print-out for installation engineer (expanded print routine)
This expanded print routine follows the same sequence as the standard print-out already described, but
you can enter even more parameters.
The device must be in measuring mode.
⇒
Press the
key.
After the standard entries, such as number of copies, plant number and nominal output, you must specify
the heat output capacity for the combustion process.
Enter QF heat output
_ kW
to
and confirm with
.
Specification of fuel quantity
Enter flow rate
_ l/h
to
and confirm with
.
The remaining parameter queries are identical to those for printing.
Page 14
