2.4
Printing
2.4.1
Printing measurements
In order to print out measurement results, the device must still be in measuring mode; i.e. the display must
show the following:
O2 7.3% TA 19.0°C
CO2 10.1% TG 38.0°C
CO 6m qAF 0.6%
qA 1.1%
To print press the
key.
Number of copies
1
to
and confirm with
.
if you want to change the entries, you can use the arrow key
to scroll back
in the menu and type in your changes in the required place and then save with
the
key.
You can now enter the plant number, max. 16 digits/letters or special characters.
With this key
you can switch between numbers and letters/special characters.
Enter plant no.
_
P: Mode = 1234
to
and confirm with
.
In the event of further measurements during the normal operating period, the last plant number you
entered will be suggested to you.
Entering nominal output:
Enter nominal output
_ kW
to
and confirm with
.
Entering temperature of heating medium:
Enter boiler temp.
_ °C
to
and confirm with
.
Load selection:
Load
Do not print
Select options with
, confirm with
Page 11
