ATI
Q46D-ODO Optical D.O. System
Part 2 – Analyzer Mounting
10
O&M Manual
Rev-J (8/17)
2.2
Wall or Pipe Mount
A PVC mounting bracket with attachment screws is supplied with each
transmitter (see Figure 2 for dimensions). The multi-purpose bracket is attached
to the rear of the enclosure using the four flat head screws. The instrument is
then attached to the wall using the four outer mounting holes in the bracket.
These holes are slotted to accommodate two sizes of U-bolt that may be used to
pipe mount the unit. Slots will accommodate U-bolts designed for 1½ “or 2” pipe.
The actual center-to-center dimensions for the U-bolts are shown in the drawing.
Note that these slots are for U-bolts with ¼-20 threads. The 1½” pipe U-bolt (2”
I.D. clearance) is available from ATI in type 304 stainless steel under part
number 47-0005
Figure 2 - Wall or Pipe Mount Bracket
