Analytic Systems Pure Sine 300, Инструкция по установке и эксплуатации

Страница: 7 / 12

6
TROUBLE SHOOTING
This unit provides LED indicators and a buzzer to help diagnose any problems. The unit should
sound the buzzer to alert you prior to shutting itself down. You should immediately check the
indicators to determine the cause of the shutdown.
LED INDICATORS
•
LOW VOLTAGE Indicates that the battery voltage is below normal because:
•
The battery needs to be recharged,
•
The battery voltage is not compatible with the inverter.
•
OVER TEMP Indicates that the inverter is running too hot because:
•
Too much power is being drawn, turn off or unplug some devices.
•
The inverter is located in a poorly ventilated area.
•
OVER LOAD Indicates that the load is trying to draw more current than the
inverter can supply:
•
Too much power is being drawn, turn off or unplug some devices.
•
SHORT CIRCUIT Indicates that a short circuit has occurred at the inverter output:
•
Turn off the inverter. Disconnect all devices from the inverter and
clear the short before reconnecting devices to the inverter.
•
GROUND FAULT Indicates that the inverter has detected a ground fault and has shut
itself down to prevent a possible electric shock to the user. This could
be caused by dampness, faulty mechanism, worn insulation, etc.:
•
Turn the inverter off. Have a qualified person determine the reason
for the ground fault and correct the problem.
•
STANDBY Indicates that the inverter has gone into the Power Save mode.
•
LOW VOLTAGE
& OVER TEMP Indicates the output voltage has risen above the specified output range
and the inverter has shut itself down to prevent damage to the
equipment plugged into it.
•
The inverter has an internal fault and must be returned to the
factory for repair.