Introduction
The BCA610 AC source battery charger provides up to 600 watts of precision charging power
to charge your one or two bank battery system. The batteries must share a common ground.
This unit can be built to operate from any conventional AC mains power of 110 or 220 VAC .In
the absence of a battery, the BCA610 can also function as a power supply up to its continuous
current rating. See
Specifications
for the output current rating of your unit.
Suitable for all your battery charging needs, this unit can be configured to charge a 12, 24, 32,
or 48 volt battery bank. With the output voltage adjust and user-selectable charging profiles,
you have optimal control in how you charge your batteries. Additionally, voltage temperature
compensation protects your expensive battery banks from overly harsh charging, prolonging
their lifespan.
Internally, the recently updated single board design incorporates time-tested switch mode
technology for unmatched efficiency and ultra-quiet operation. Additional filtering on the input
and output reduce conducted and radiated EMI noise to very low levels.
Designed with safety in mind, this unit’s safety features include reverse input connection,
input fuse, over temperature shutdown, short circuit protection, input/output under voltage
shutdown, reverse battery connection and output overvoltage crowbar.
