OPTIMIZER HD
PAGE 19
Chapter 4 : UPDATING THE DEVICE
The OPTIMIZER HD can be updated using a computer (PC) via its RS-232 communication port or via its LAN
communication port.
4-1. UPDATE SOFTWARE INSTALLATION
c
Download the Optimizer HD Updater available our Web site
http://www.analogway.com
d
Copy the file (eg: OptimizerHD_UP_V0041700.exe) onto the computer used for the RS232 and execute it. Then
follow the installation instruction (don’t forget to accept the license agreement).
4-2. DEVICES CONNECTIONS
c
Connect the device to an AC power outlet.
d
Switch ON the device (REAR PANEL SWITCH = I).
e
Connect the device to the computer used for the update via the desired communication port.
•
For the RS232 communication port: Connect the RS232 connector of the device to the serial port of your
computer with a DB9 M/F straight cable. Then with the front panel display menu activate the RS232
communication port (
CONTROL > RS232/LAN > RS232
).
•
For the LAN communication port: Connect the RJ45 connector of the device to your network according to your
installation. Then with the front panel display menu configure the LAN communication port (
CONTROL > LAN
setup
) and activate the LAN communication port (
CONTROL > RS232/LAN > LAN
).
4-3. UPDATE INSTRUCTIONS
c
Open the file: Optimizer HD.exe (in
Start > Program > ANALOGWAY > Optimizer HD updater
).
d
In the
Port
menu select the
Setup
then select the
Connection type
(RS232, UDP or TCP) and select the
communication parameters.
e
Click on
START
on the software. The update will start.
f
When the software displays:
Program operation completed
, click on the
Quit
button to close the update software.
Your Optimizer HD is now ready to work.
NOTE:
The updater files are available on our web site:
http://www.analogway.com
