10
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
3
Hardware Specifications
3.1
Safety instructions
English
All of the safety and operating instructions should be read before the product is operated and should be
maintained for further reference. Please follow all of the warnings on this product and its operating
instructions.
•
WARNING
: To prevent the risk of electric shock and fire, do not expose this device to rain, humidity or
intense heat sources (such as heaters and direct sunlight). This equipment is not suitable for use in locations
where children are likely to be present.
•
INSTALLATION
: Slots and openings in the device are provided for ventilation and to avoid overheating.
Make sure the device is never placed near a textile surface that could block the openings. Also keep away
from excessive dust, vibrations and shocks.
•
POWER
:
Connect earth before connecting to supply. Use an earth cable to earth a screw of the unit’s chassis.
Only use the power supply indicated on the device of the power source. Devices equipped with a grounding
plug should only be used with a grounding type outlet. In no way should this grounding be modified, avoided
or suppressed. Connection of equipment to main supply must be after branch circuit breaker of the building
installation.
•
POWER CORD
: The device can be equipped with 2 or 3 detachable power cords, to remove mains,
disconnect them at appliance coupler.
Caution
: The power cords constitute the only mean to completely disconnect the equipment from the main power.
Use the following guidelines
:
- The equipment connected to the network must have a release system easily accessible and located
outside the unit.
- Unplug the power cords; do not pull on the power cords but always on the plug itself.
- The outlet should always be near the device and easily accessible.
- Power supply cords should be routed so that they are not likely to be walked on or pinched by items
placed upon or against them.
If one of the power supply cords is damaged, unplug the device. Using the device with a damaged power
supply cord may expose your device to electric shocks or other hazards. Verify the condition of the power
supply cords periodically. Contact your dealer or service center for replacement if damaged.
•
CONNECTIONS
: All inputs and outputs (except for the power input) are Electrical energy source class 1 (ES1)
as defined in IEC/UL 62368-1 edition 2.
ES1 limits: 60Vdc or 30V rms/ 42.4V peak.
•
SERVICING
: Disconnect all power supply cords from main before servicing.
According to IEC 62368-1 standard, an ordinary person is authorized to:
-
Open the front panel cabinet and clean the air filter
-
Change a removable power supply
Do not attempt to service this product yourself by opening or removing covers and screws since it may expose
your device to electric shocks or other hazards. The internal Lithium cell battery is not replaceable. In case of
problem, contact your supplier or Analog Way.
•
OPENINGS
: Never push objects of any kind into this product through the openings. If liquids have been
spilled or objects have fallen into the device, unplug it immediately and have it checked by a qualified
technician.
