Connectors
2-24
ADSP-21375 EZ-KIT Lite Evaluation System Manual
S/PDIF Coax Connectors (J7 and J8)
DPI Header (P3)
The DPI connector (
P3
) provides access to all of the DPI signals in the
from of a .1” spacing header. When using the header to access the DPI
pins of the processor, ensure that signals, which normally drive the DPI
pins, are disabled. For more information, see
DAI Header (P4)
The DAI connector (
P4
) provides access to all of the DAI signals in the
from of a .1” spacing header. When using the header to access the DAI
pins of the processor, ensure that signals, which normally drive the DAI
pins, are disabled. Refer to
“Codec Setup Switch (SW3)” on page 2-11
for
more information on how to disable signals already being driven from
elsewhere on the EZ-KIT Lite.
Part Description
Manufacturer
Part Number
Coaxial SWITCHCRAFT
PJRAN1X1U01
Mating Cable
Two-channel RCA interconnect
cable
MONSTER CABLE
BI100-1M
Part Description
Manufacturer
Part Number
20-pin IDC header
FCI
68737-420HLF
Part Description
Manufacturer
Part Number
26-pin IDC header
BERG
4102-T08-13LF