Analog Devices EZ-KIT Lite ADSP-BF533, Руководство пользователя

Страница: 58 / 108

Using EZ-KIT Lite Vi+ Interface
2-18 ADSP-BF533 EZ-KIT Lite Evaluation System Manual
Other Options
Table 2-13 describes other available target options.
Table 2-12. On Emulator Exit Target Options
Option Description
On Emulator Exit Determines the state the DSP is left in when the emulator relinquishes con-
trol of the DSP:
Reset DSP and Run causes the DSP to reset and begin execution from its
reset vector location.
Run from current PC causes the DSP to begin running from its current
location.
Stall the DSP resets the DSP and then writes a
JUMP 0
to the first location
in internal memory so the DSP is stuck in a tight loop after exiting.
Table 2-13. Miscellaneous Target Options
Option Description
Reset before loading exe-
cutable Resets registers before loading a DSP executable. Clear this option
when DSP registers must not change to their reset values when a file
load occurs.
Verify all writes to target
memory Validates all memory writes to the DSP. After each write, a read is
performed and the values are checked for a matching condition.
Enable this option during initial program development to locate
and fix initial build problems (such as attempting to load data into
non-existent memory).
Clear this option to increase performance while loading executable
files, since Vi+ does not perform the extra reads that are
required to verify each write.