manualshive.com logo in svg

Analog Devices EZ-KIT Lite ADSP-BF533, Руководство пользователя, Страница: 3 / 108

Поделиться
Скачать
Analog Devices EZ-KIT Lite ADSP-BF533 Скачать руководство пользователя страница 3

Regulatory Compliance 

The ADSP-BF533 EZ-KIT Lite evaluation system has been certified to 
comply with the essential requirements of the European EMC directive 
89/336/EEC (inclusive 93/68/EEC) and, therefore, carries the “

CE

” 

mark. 

The ADSP-BF533 EZ-KIT Lite evaluation system had been appended to 
the Technical Construction File referenced “

DSPTOOLS1

” dated 

December 21, 1997 and was awarded CE Certification by an appointed 
European Competent Body as listed below. 

Technical Certificate No: Z600ANA1.011   

Issued by:

Technology International (Europe) Limited 

     41 Shrivenham Hundred Business Park 

     Shrivenham, Swindon, SN6 8TZ, UK

 

The EZ-KIT Lite evaluation system contains ESD 
(electrostatic discharge) sensitive devices. Electro-
static charges readily accumulate on the human 
body and equipment and can discharge without 
detection. Permanent damage may occur on devices 
subjected to high-energy discharges. Proper ESD 
precautions are recommended to avoid performance 
degradation or loss of functionality. Store unused 
EZ-KIT Lite boards in the protective shipping 
package. 

Содержание EZ-KIT Lite ADSP-BF533













































































































Отзывы:

Нет отзывов