UG-1673
One
Technology Way • P.O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel: 781.329.4700 • Fax: 781.461.3113 • www.analog.com
Low Power, 10 Mbps and 100 Mbps Ethernet PHY
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. 0 | Page 1 of 29
FEATURES
FMC connector for MII interface, MDIO signals, and status
signals
Accessible, surface-mount configuration resistors and dial
switches
Operates from a single, external, 5 V supply
EVALUATION KIT CONTENTS
2 EVAL-ADIN1200FMCZ evaluation boards
2 MDIO interface dongles
EQUIPMENT NEEDED
5 V power supply rail to connect to EXT_5V connector or 5 V
barrel adapter to connect to P4 plug
Ethernet cable
USB cable
PC running Windows 7 and upward
SOFTWARE NEEDED
Ethernet PHY software and GUI (available to download on
the
product page)
DOCUMENTS NEEDED
data sheet
GENERAL DESCRIPTION
The EVAL-ADIN1200FMCZ allows simplified evaluation of the
key features of the
robust, industrial, low power
10 Mbps and 100 Mbps Ethernet physical layer (PHY). The
EVAL-ADIN1200FMCZ is powered by a single, external, 5 V
supply rail that can be supplied either via the EXT_5V connector or
via the P4 plug.
All chip supplies are regulated from the 5 V rail providing
supply rails required for AVDD_3P3 and VDDIO.
The P3 field programmable gate array (FPGA) mezzanine card
(FMC) connector is provided for connection to a master FPGA
system for the media access control (MAC) interface and
management data input/output (MDIO) control. The P5
connector provides an alternative means for MDIO control. The
EVAL-ADIN1200FMCZ is fitted with a 25 MHz crystal (Y1).
For complete specifications for the
data sheet, which must be consulted in conjunction
with this user guide when using the EVAL-ADIN1200FMCZ.
