EVAL-ADHV4702-1CPZ
User Guide
UG-1444
Rev. 0 | Page 9 of 10
HIGH VOLTAGE EVALUATION BOARD
Warning: this high voltage evaluation board contains exposed metal carrying lethal voltages when under power. Take all necessary steps
to protect users during operation.
WARNINGS, RESTRICTIONS, AND DISCLAIMERS
For evaluation only, in laboratory or development environments, by professionals trained to handle high voltage devices.
This
evaluation board is not a finished electrical equipment and not intended for consumer use. It is intended solely for use for preliminary
feasibility evaluation in laboratory or development environments by technically qualified electronics experts who are familiar with the
dangers and application risks associated with handling high voltage electrical components, systems, and subsystems. It is not to be used as
all or part of a finished end product.
Your Responsibility and Risk.
You acknowledge, represent, and agree that
1.
You have knowledge of all federal, state and local regulatory requirements that relate to your products and that relate to your use
(and/or that of your employees, affiliates, contractors, or designees) of the evaluation board for evaluation, testing, and other
purposes.
2.
You have full and exclusive responsibility to assure the safety and compliance of your products with all such laws and other applicable
regulatory requirements, and also to assure the safety of any activities to be conducted by you and/or your employees, affiliates,
contractors, or designees, using the evaluation board. Further, you are responsible to assure that any interfaces (electronic and/or
mechanical) between the evaluation board and any human body are designed with suitable isolation and means to safely limit
accessible leakage currents to minimize the risk of electrical shock hazard.
3.
You must employ reasonable safeguards to ensure that your use of the evaluation board does not result in any property damage,
injury, or death, even if the evaluation board fails to perform as described or expected.
4.
You must properly dispose of or recycle the electronic components of the evaluation board to avoid injury to any other person.
Key Instructions.
It is important to operate this evaluation board within Analog Devices recommended specifications and environmental
considerations per the user guidelines.
Exceeding the specified evaluation board ratings (including but not limited to input and
output voltage, current, power, temperature, and environmental ranges) may cause property damage, personal injury, or death
. If
there are questions concerning these ratings, contact an Analog Devices representative prior to connecting interface electronics or loads.
Any loads applied outside of the specified output range may result in unintended and/or inaccurate operation and/or possible permanent
damage to the evaluation board and/or interface electronics. Consult the evaluation board user guide prior to connecting any load to the
evaluation board output. If there is uncertainty as to the load specification, contact an Analog Devices representative. During normal
operation, some circuit components may generate significant heat, which may cause fire, melting, or burns. When placing measurement
probes near these devices during normal operation, be aware that these devices may be hot. As with all electronic evaluation tools, only
qualified personnel knowledgeable in electronic measurement and diagnostics are to use the evaluation board.
Agreement to Defend, Indemnify and Hold Harmless.
You agree to defend, indemnify, and hold Analog Devices, its directors, officers,
employees, and their representatives harmless from and against any and all claims, damages, losses, expenses, costs, and liabilities
(collectively, "Claims") arising out of or in connection with any use of the evaluation board that is not in accordance with the terms of the
agreement. This obligation applies whether Claims arise under law of tort or contract or any other legal theory, and even if the evaluation
board fails to perform as described or expected.
