Analog Devices EVAL-ADF7023DBxZ, Руководство пользователя

Страница: 11 / 49

R e v 1 . 1 | Page 11
Connecting the Evaluation Boards
This software can allow TWO evaluation boards to be connected to a single PC. The EVAL board and the software must
be setup accordingly.
Ensure that Switch 4 is in the correct position before connecting to the PC as shown in Figure 14 .
Figure 14
•
To set the first board as “ BOARD 1 ” (
Figure 15
) on the Software set the switch shown in
Figure 14
to “ B1 ”
•
To set the second board as “ BOARD 2 ” (
Figure 15
) on the Software set the switch shown in
Figure 14
to “ B2 ”
Ensure the evaluation mother board with the desired daughter card is connected to the PC via USB cable before running
the software.
Run the ADF7023 software from Start-> Programs->Analog Devices->ADF7xxx->ADF7023.
Once the software is running press Connect USB (
Figure 16
).
Figure 15