Analog Devices EVAL-ADF7023DBxZ, Руководство пользователя

Страница: 20 / 49

R e v 1 . 1 | Page
20
Entering PHY_TX for basic RF Carrier testing
1. Select the “ RF Settings ” Tab and set the RF parameters as required. ( Figure 28 point ( 1 )
2. Select “ Packet Mode ” ( Figure 28 point ( 2 ))
3. Set Tx Test Mode to “ Transmit Carrier ” ( Figure 28
point
(
3
))
4. Ensure part is in PHY_ON ( Figure 28 point ( 4 ))
5. Press Update Needed . This writes the settings to BBRAM and then does a CMD_CONFIG_DEV
( Figure 28 point ( 5 ))
6. Press “ CMD_PHY_TX ” to enter transmit mode (continuous carrier transmission) ( Figure 28 point ( 6 ))
7. To exit PHY_TX press CMD_PHY_ON ( Figure 28 point ( 4 ))
Figure 28