Analog Devices ADSP2192-12 EZ-KIT LITE, Руководство пользователя

Страница: 31 / 50

ADSP2192-12 EZ-KIT Lite Evaluation System Manual
4-4
BUS1
BUS0
JP1
PCI
BUS1
BUS0
JP1
USB
BUS1
BUS0
JP1
Stand Alone
BUS1
BUS0
JP1
CardBus
Figure 4-3: BUS Pin Settings (JP1)
BUS [1:0] MODE JP1 (Pin 1 and Pin 2) JP1 (Pin 3 and Pin 4)
00
*PCI IN IN
01 CardBus (Unused) IN OUT
10 USB OUT IN
11 Sub-ISA
Stand Alone
OUT OUT
* Denotes Default setting.
Table 4-3: BUS Pin Settings (JP1)
For more information on the ADSP2192-12 DSP bus pins, refer to the ADSP2192-12 datasheet.
4.5.2 USB / Stand-Alone Selection Jumpers (JP5)
The USB / Stand-alone Jumper selection allows a user to choose between USB operation and Stand-
alone operation. In PCI mode when the switch SW4 is set accordingly, this jumper is disregarded.
USB/stand-alone operation are optional modes and is not supported by the supplied Vi+
monitor-based software.
NOTE: Use this Jumper in conjunction with JP1 and SW4 to properly set-up the board.
www.BDTIC.com/ADI