Analog Devices ADSP2192-12 EZ-KIT LITE, Руководство пользователя

Страница: 21 / 50

ADSP2192-12 EZ-KIT Lite Evaluation System Manual
2-10
Figure 2-12: The driver has been successfully installed.
7. Reboot the system before attempting to run the debugger over the PCI interface.
2.4.2.2 Installing Vi+ and the EZ-KIT Lite Software
This EZ-KIT Lite comes with the latest version of Vi+ for the ADSP-219x DSP family.
Insert the Vi+ CD-ROM into the CD-ROM drive. If Auto Run is enabled on your PC, you
see the home screen of the Vi+ install wizard. Otherwise, choose
Run from the Start
menu, and enter D:\Setup.exe in the Open field, where D is the name of you local CD-ROM drive.
Click on the Vi+ 3.0 Installation option. Then select Install Tools . This will launch the
setup wizard. At the component selection screen, select ADSP2192-12 EZ-KIT Lite to install the
EZ-KIT Lite debug software. Follow this wizard with the on-screen instructions to continue
installing the software.
2.4.2.3 Installing the EZ-KIT Lite License Software
Before the Vi+ software can be used, the license software must be installed. To install the
EZ-KIT Lite license software, follow these steps:
1. Make sure Vi+ has been installed first.
2. Insert the VisualDSP CD into the CD-ROM drive if it is not already in the drive.
3. Once the CD browser is on the screen select the Install License option.
4. Follow the setup wizard instructions. (Note: Make sure that you have the proper serial
number located on the back of the CD holder.)
www.BDTIC.com/ADI