ADSP-CM403F EZ-KIT Lite Evaluation System Manual
ix
PREFACE
Thank you for purchasing the ADSP-CM403F EZ-KIT Lite
®
, Analog
Devices, Inc. low-cost evaluation system for the ADSP-CM403F
mixed-signal control processor.
The ADSP-CM403F processor is based on the ARM
®
Cortex
®
-M4 pro-
cessor core and is designed for photovoltaic applications. The EZ-KIT
Lite is shipped with all of the necessary hardware—you can start the eval-
uation immediately. The package contains the standalone evaluation
board and CE-approved power supply. The EZ-KIT Lite version ships
with the J-Link Lite ARM, while the EZ-Board
®
version requires the cus-
tomer to provide a debugger.
Two expansion connectors (analog interface and PWM/digital interface)
are provided for connecting boards that incorporate motors. Another
expansion connector is provided for connecting an Anybus board and/or a
memory/FPGA extender card.
Traditional mechanical switches for changing the board’s factory setup
have been removed in favor of I
2
C controlled software switches. The only
remaining mechanical switches are the boot mode switch and push
buttons.
