Analog Devices ADSP-21369 EZ-KIT Lite, Руководство пользователя

Страница: 28 / 95

Vi+ Install and Session Startup
1-8 ADSP-21369 EZ-KIT Lite Evaluation System Manual

To disconnect from the target board, click the terminate button
(red box) or choose
Run > Terminate .
To delete a session, choose Target > Session > Session List . Select
the session name from the list and click Delete . Click OK .
Vi+ Install and Session Startup
For information about Vi+ and to download the software, go to
www.analog.com/VisualDSP
.
1. Plug the provided power supply into
J4
on the EZ-KIT Lite board.
Visually verify that the green power LED (
LED9
) is on.
2. Verify that the red reset LED (
LED10
) goes on for a moment and
then goes off, and, finally,
LED1
through
LED8
are sequentially
blinking.
3. Connect one end of the USB cable to an available full speed USB
port on your PC and the other end to
ZJ1
on the ADSP-21369
EZ-KIT Lite board.
4. Verify that the yellow USB monitor LED (
ZLED3
, located near the
USB connector) is lit. This signifies that the board is communicat-
ing properly with the host PC and is ready to run Vi+.
Session Startup
1. If you are running Vi+ for the first time, navigate to the
Vi+ environment via the Start > Programs menu. The
main window appears. Note that Vi+ does not connect to
any session. Skip the rest of this step to step 2.
If you have run Vi+ previously, the last opened session
appears on the screen. You can override the default behavior and