background image

Manual Contents

xiv

ADSP-21369 EZ-KIT Lite Evaluation System Manual

Manual Contents

The manual consists of:

• Chapter 1, 

“Using the ADSP-21369 EZ-KIT Lite” on page 1-1

Describes EZ-KIT Lite operation from a programmer’s perspective 
and provides an easy-to-access memory map. 

• Chapter 2, 

“ADSP-21369 EZ-KIT Lite Hardware Reference” on 

page 2-1

Provides information on the EZ-KIT Lite hardware components

• Appendix A, 

“ADSP-21369 EZ-KIT Lite Bill Of Materials” on 

page A-1

Provides a list of components used to manufacture the EZ-KIT 
Lite board.

• Appendix B, 

“ADSP-21369 EZ-KIT Lite Schematic” on page B-1

Provides the resources to allow board-level debugging or to use as a 
reference guide. Appendix B is part of the online help.

What’s New in This Manual

This is revision 2.4 of the 

ADSP-21369 EZ-KIT Lite Evaluation System 

Manual

. The manual has been updated to include CCES information. 

Additional changes include the following. 

• Updated Bill of Materials, 

Appendix A, “ADSP-21369 EZ-KIT 

Lite Bill Of Materials”

.

• Updated ADSP-21369 EZ-KIT Lite Schematic, 

Appendix B, 

“ADSP-21369 EZ-KIT Lite Schematic”

.

• Modifications and corrections based on errata reports against the 

previous manual revision have been made.

Содержание ADSP-21369 EZ-KIT Lite
































































































Отзывы: