Quick Start Guide
AD9125-EBZ
©2010 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D00000-0-1/07(A)
Figure 56: Bench Set-Up
ACE also contains the Macro Tool, which can be used to record register reads and writes. This is executed in the memory map view or with
the initialization wizard. To use, check the “Record Sub-Commands” checkbox and press the record button. Changes in the memory map,
which are bolded until they are applied to the part, are recorded as UI commands by the macro tool once the changes are made. Changed
register write commands for the controls are also recorded. Hit “Apply Changes” to execute the commands and make changes in the memory
map. To stop recording, click the “Stop Recording” button. A macro tool page with the command steps will be created. The macro can be
saved using the “Save Macro” button so that it may be loaded for future use.
Figure 67: Macro tool in ACE. The “Stop Recording,” “Record,” and “Save Macro” commands are located at the top of the macro tool
