manualshive.com logo in svg

Anaheim Automation PCL501, Руководство пользователя

Поделиться
Скачать
Anaheim Automation PCL501 Скачать руководство пользователя страница 28

28

#L010120

November 2001

I - Read Inputs

  Format: I

 

Description:  This command returns the binary value of the inputs to the PC. Since the inputs    

 

 

are pulled up internally, they will return a high when they are pulled low. For  

 

 

 

example, if all inputs are active (grounded), the command will return a 15. If all    

 

 

inputs are inactive (open), the command will return a 0. Input 1 is the LSB, input    

 

 

2 is the second bit, input 3 is the third bit, and input 4 is the MSB.

O - Set Outputs

 

Format: 

O [value]

 

Description:  This command sets the outputs according to the binary value. Output 1 is the  

 

 

 

LSB and output 2 is the MSB.

 

Range:  

0 - 3

V - Verify

 

Format: 

V [command]

 

Description:  This command can be used with most commands to verify the register contents.   

 

 

This is a read only command. Valid Commands are: A, B, F, J, M, N, 0, P, Z, and   

 

 

+.

L0 - Get Limit Status

  Format: L0

 

Description:  This command returns the binary value of the hard and soft in a binary format.    

 

 

The soft limit is the LSB and the hard limit is the MSB.

LS - Soft Limit Input Bit

  Format: LS

 

Description:  This command will ramp the clocks down to base speed. The move type then de-  

 

 

termines what will happen. In a relative or absolute type motion the PCL501(PC)   

 

 

will continue to the set position and stop. In a slew type motion the PCL501(PC) will  

 

 

 

ramp down and stop.

July 2018

L010121

Содержание PCL501




































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды