AMX Precis HT, Инструкция по эксплуатации

Страница: 49 / 65

Control Panel Operation
43 Precis HT Instruction Manual
Locking & Unlocking the Control Panel
Locking the Precis HT control panel prohibits access to the system and can prevent accidental switching.
While the panel is locked, BCS commands still work; however, they cannot be used to unlock the panel.
The panel remains locked if the power is cycled.
The factory default password is the first five Level Keys, pressed consecutively from left to right. You
can set a new password using XNConnect (see page 52) with any combination of the Level Keys.
Important: We strongly recommend recording the password in a secure place; the Precis HT
system cannot retrieve a lost password. If the password is lost while the system is locked,
contact technical support (see page 31)
.
After you press the Lock Key, you have 10 seconds to enter the password before the control panel reverts
to its previous mode (Locked or Switch mode). If you enter the wrong password, press the Lock Key
again and enter the correct password.
To lock the control panel:
1.
Press the Lock Key.
The Lock Key flashes for 10 seconds, and all the other lights on the control panel turn off.
The panel is in Lock mode.
2.
While the Lock Key is flashing, enter the password using the Level Keys.
The Lock Key stops flashing and remains illuminated. All the other lights on the panel are turned
off.
The control panel is locked.
To unlock the control panel:
1.
Press the Lock Key.
The Lock Key flashes for 10 seconds.
The panel is in Lock mode.
2. While the Lock Key is flashing, enter the password using the Level Keys.
The Lock Key turns off. Any lights previously illuminated on the control panel turn back on.
The control panel is unlocked and in Switch mode.
FIG. 25
Lock Key and Level Keys
Use Level Keys to enter password
Places system in Lock Mode
Returns system to Switch Mode