manualshive.com logo in svg

AMX Precis HT, Инструкция по эксплуатации

Поделиться
Скачать
AMX Precis HT Скачать руководство пользователя страница 24

Installation & Setup

18

Precis HT Instruction Manual

Attaching External Controllers

The Precis HT can be controlled externally by attaching an external control device that uses one of the 
communication protocols listed below:

 

BCS (Serial)

 – ASCII sent over a null modem serial cable via the CONTROL port

 

XNNet 

– AMX AutoPatch protocol via all ports (including serial); AMX AutoPatch control 

and accessory devices usually connect via the REMOTE port

Control Options

The communication protocols listed above are used for these control options:

AMX Control Device

The Precis HT is compatible with a number of AMX control devices. For control programming 
information, see the instruction manual for the specific interface.

AMX AutoPatch Remote Control Panels & SBCs

AMX AutoPatch remote control panels and other AMX AutoPatch control devices (SBCs and 
Preset SBCs) usually connect to either REMOTE port on the CPU. For instructions for attaching an 
external controller to a REMOTE port, see page 21. For specific information on the remote control 
device, see its product documentation.

APControl 3.0 (Serial)

APControl 3.0 software (for control and scheduling) runs on a PC connected to a Precis HT via the 
CONTROL port and is available on the 

AMX AutoPatch CD

. 

APWeb (TCP/IP)

The APWeb Server (for control, diagnostics, and third-party access) is accessed through a TCP/IP 
interface, such as, a web browser (e.g., Internet Explorer). An APWeb Server Module is required for 
APWeb. For setup and operation information, see the APWeb Server Module’s documentation on the 

AMX AutoPatch CD

 and at 

www.amx.com

.

Important:

 Contact AMX regarding limitations and conditions for operating a Precis HT on 

a company LAN.

XNNet Protocol (Serial)

Advanced programmers who want to design their own control programs can use AMX AutoPatch 
XNNet protocol. The 

AMX AutoPatch CD

 includes the XNNet Communication Library, an interface 

library that supports C, Java, and Visual Basic and has examples of the XNNet protocol in use.

BCS (Serial) Control

AMX AutoPatch has developed a command language, BCS (Basic Control Structure), for executing 
control operations and for diagnostic purposes. BCS commands are issued via a terminal emulation 
program, such as Windows

®

 HyperTerminal. For information on BCS commands, see the 

BCS Protocol

 

Instruction Manual

 on the 

AMX AutoPatch CD

 or at 

www.amx.com

.

Third-Party Controllers (Serial)

Third-party controllers connect to the CONTROL port (RS-232) on the CPU. If using a third-party 
controller, see the controller documentation for setup and operating instructions.

Содержание Precis HT


































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды