![background image](http://html1.mh-extra.com/html/amx/nmx-mm-1000/nmx-mm-1000_administrators-manual_2937948078.webp)
Updating Firmware
69
Administrators Guide - NMX-MM-1000 Enzo Meeting Presentation System
Updating Firmware
Overview
Upgrading firmware on the Enzo involves downloading the latest firmware files from www.amx.com and performing one of the
following tasks:
Copy the .kit file to a USB drive, insert the USB drive into the Enzo, and install the firmware
Use the Web. Enzo will connect, display the latest versions of firmware, and allow download and updates.
Use NetLinx Studio to transfer the files to the Enzo. The NetLinx Studio software application (available for free download
from www.amx.com) provides the ability to transfer KIT firmware files to a NetLinx device such as the Enzo.
The following sections describe how to update the firmware on the Enzo using the available options.
shown below
Updating the Firmware Through the Web
Updating the Firmware Through NetLinx Studio
Updating Firmware from USB
Download the Latest Firmware Files from www.amx.com
Visit the appropriate product page on www.amx.com for the latest firmware (*.kit) files for Enzo. Firmware file links are available
along the right-side of the catalog page. Firmware files are bundled in a ZIP file, along with a Readme.TXT file that provides details
on this firmware release. Perform the following steps to download the latest firmware files:
1.
Accept the AMX Licensing Agreement.
2.
Download the ZIP file and unzip the contents to a known location.
Installing Firmware onto Enzo
The firmware can easily be updated on the Enzo Meeting Presentation System by using a USB storage device containing the latest
firmware .kit file downloaded from
www.amx.com
. Perform these steps to update the firmware on the Enzo Meeting Presentation
System:
1.
Copy the .kit file and all other associated files onto a USB storage device.
2.
Connect the USB storage device to any of USB port located on the front or rear panel of the Enzo.
NOTE:
Once a USB drive is connected and Enzo mounts the drive, the files on it may be accessed. If a message stating "the USB drive
is mounted" is not received, Enzo did not recognize the drive.
3.
On the Enzo main screen, press F12 to enter the settings screen and click on
Reset and Update
FIG. 137
Enzo System Settings Screen