NetLinx Firmware Upgrades
46
NXB-KNX Operation/Reference Guide
NetLinx Studio transfers the files to the NXB-KNX and then tells it to reboot. After it reboots, the
NXB-KNX actually goes through the upgrade process.
During the upgrade process, the Status LED blinks, and the NXB-KNX stays offline.
Once the upgrade is complete, the LED will stop blinking and the NXB-KNX will come online.
Additional Documentation
For additional information on using NetLinx Studio, refer to the NetLinx Studio online help and Operation/
Reference Guide (available at www.amx.com).
If for any reason your Kit file transfer should fail, continue to retry the transfer until
you are successful. DO NOT reboot the NXB-KNX, or change connections until the
transfer is complete. Failure to complete this operation successfully may require a
factory repair of the NXB-KNX.
Содержание NetLinx NXB-KNX
Страница 6: ...iv NXB KNX Operation Reference Guide Table of Contents ...
Страница 56: ...One Time Upgrade of the NXB KNX to a Native NetLinx Device 50 NXB KNX Operation Reference Guide ...
Страница 64: ...Appendix A Telnet Commands 58 NXB KNX Operation Reference Guide ...
Страница 67: ...Programming Telnet Commands 61 NXB KNX Operation Reference Guide ...