Configuration
6
NXB-KNX Operation/Reference Guide
Refer to the NetLinx Studio online help for details on using Zero-Config.
Accessing the NXB-KNX WebConsole via Zero-Config
Assuming that the NXB-KNX resides on the same LAN as the PC running NetLinx Studio, and the NetLinx
Master to which the NXB-KNX is connected, you can access the NXB-KNX via the Zero-Config feature in
Netlinx Studio, as described below:
1.
In NetLinx Studio (version 3.0 or higher), right-click inside the
Zero-Config
tab of the Workspace Bar to
access the Zero-Config context menu (FIG. 7).
2.
Select
Refresh List
to generate an initial listing of all Zero-Config devices detected (FIG. 8).
3.
Click the plus symbol (+) to expand any device in the Zero-Config list. The device’s current IP Address is
listed below the device name (FIG. 8):
FIG. 6
Workspace Bar - Zero-Config tab
FIG. 7
NetLinx Studio - Zero-Config context menu
FIG. 8
Workspace Bar - Zero-Config tab
Содержание NetLinx NXB-KNX
Страница 6: ...iv NXB KNX Operation Reference Guide Table of Contents ...
Страница 56: ...One Time Upgrade of the NXB KNX to a Native NetLinx Device 50 NXB KNX Operation Reference Guide ...
Страница 64: ...Appendix A Telnet Commands 58 NXB KNX Operation Reference Guide ...
Страница 67: ...Programming Telnet Commands 61 NXB KNX Operation Reference Guide ...
