AMX NetLinx NXB-KNX, Руководство по эксплуатации/справочник

Страница: 16 / 68

Configuration
10 NXB-KNX Operation/Reference Guide
Login Information
Use this set of options to specify a Username and Password. These will be required only if one or more of the
Security Settings are enabled.
Click Accept to save your changes. Note that changes on this page take effect immediately.
Click Cancel to cancel any changes.
Logging Into the Configuration Manager (With Security Enabled)
Login is only required if the Web and/or Admin security options have been enabled on the unit.
1.
Click the Login link in the upper-right corner of the initial page (FIG. 5). This invokes the Login popup
page (FIG. 13).
Enter the default login information:
Username = administrator
Password = password
2.
Click the Login button.
Once you have successfully logged into the Configuration Manager, the IP Settings page is displayed, and can
be edited as needed.
Username: Enter the Username that will be required to login to this unit if
security is enabled. The default Username is "administrator".
New Password: Enter a new password that will be required to login to this unit if
security is enabled. The default Password is "password".
Confirm Password: Re-enter the new password in this field.
Restore Factory Defaults: Click to restore the login information to the factory defaults:
• Default Username =
administrator
• Default Password = password
FIG. 13 NXB-KNX Configuration Manager - Login popup page