AMX MXD-430, Инструкция по эксплуатации, Страница: 74 / 86

Installing Wall-Mount (MXD) Panels
68 Modero X® Series G4 Touch Panels Instruction Manual
To facilitate the disconnection, grasp the bottom of the panel (Landscape) or right side (Portrait) and pull gently
outward until the side of the panel is free of the snap. Use your other hand to hold stable the front of the touch panel.
4.
When the first side is free, repeat the process with the other.
5.
With the edge of the touch panel free, carefully lift up and out (Landscape) or to the left and out (Portrait) to remove
the touch panel from the Backbox. Be careful not to pull on the cables or connectors.
6.
To reattach the panel to its Backbox, repeat the installation procedure.
MXD-430 Installation
Detailed specifications drawings for the MXD-430 are available to download from www.amx.com.
The MXD-430 may be installed directly into a solid surface environment, using either solid surface screws or the
included locking tabs for different mounting options.
Once installed, the MXD-430 is contained within a clear outer housing known as the Backbox (FIG. 23).
This Backbox is removed before installing the device into a wall or when using the optional Rough-In Box accessory
(FG039-19).
Always pull on the frame of the touch panel. NEVER pull on the glass edge.
For further information, refer to the video available at www.amx.com (go to
Newsroom > Videos > Touch Panels).
Refer to A Note About Wall and Rack Installation on page 45 for important notes
on thermal concerns with Wall and Rack Installations.
FIG. 52 MXD-430 Backbox
Locking tab
Locking tab
For typical mounting surfaces, such as drywall, use the locking tabs as the primary
method for securing the Backbox to the surface. For thin walls or solid surfaces, use
mounting screws (not included).