AMX MX16, Инструкция по эксплуатации

Страница: 7 / 16

Product Information
3
MX Series Relay Receiver Systems
Operation
RF operation
Pressing a button on the transmitter sends a signal to the receiver. The relay corresponding to the
button pressed is activated, closing the contact and controlling the associated device. Contact
closures are momentary and remain closed as long as the transmitter button is pressed and held.
IR operation
Pointing an AMX wireless transmitter at an external IR sensor (IRX-UM+ or IRX-SM+) and
pressing a button on the transmitter sends a signal to the receiver. The relay corresponding to the
pressed button is activated, closing the contact and controlling the associated device. Contact
closures are momentary and remain closed as long as the transmitter button is pressed and held.
For more information on using IR sensors, refer to the IR Sensors and Receivers instruction
manual.
TXC+ Transmitters
TXC4+ • Up to 4 buttons and a trigger
• 38 kHz or 455 kHz IR transmission frequency
• 418 MHz standard RF transmission frequency
• Up to 6 channel codes
TXC4L+ • Up to 4 buttons and a trigger
• 38 kHz or 455 kHz IR transmission frequency
• 418 MHz standard RF transmission frequency
• Up to 6 channel codes
• Laser pointer
TXC16+ • Up to 16 buttons
• 38 kHz or 455 kHz IR transmission frequency
• 418 MHz standard RF transmission frequency
TXC32+ • Up to 32 buttons
• 38 kHz or 455 kHz IR transmission frequency
• 418 MHz standard RF transmission frequency
FIG. 2 DIP switch settings for IR and RF modes
1 2 3 4 5 6 7 8 9 1 0
ON
ON
ON
123456789 1 0 12345678 9 1 0
38 kHz IR mode
455 kHz IR mode RF mode