AMX MX16, Инструкция по эксплуатации

Страница: 5 / 16

Product Information
1
MX Series Relay Receiver Systems
Product Information
The MX8 and MX16 Relay Receivers (FIG. 1) are radio frequency (RF) or infrared (IR) controlled
relay systems. Receivers for the systems include 8 (MX8) or 16 (MX16) momentary closure relays.
Models with an IRX suffix (MX8-IRX or MX16-IRX) are IR controlled and support up to 4
IRX-UM+ external IR sensors.
Specifications
MX8 (IRX) and MX16 (IRX) Specifications
Power input • 12 to 18 VDC 100 mA minimum (PS2.8 power supply adapter supplied with each
MX8 and MX16 system)
• IRX-UM(+) or IRX-SM(+) external IR receivers require an additional 25 mA each.
IR sensor IRX-DM+ (one included with MX8-IRX or MX16-IRX units)
Receiver • RF: 418 MHz
• IR (with external IR sensor): 418 MHz
Relays • MX8 (IRX): 8 momentary contacts UL rated at: 1A @ 30 VDC / 0.5 A @ 120 VAC
• MX16 (IRX): 8 momentary contacts UL rated at: 1A @ 30 VDC / 0.5 A @ 120 VAC
Front panel components:
MX8 (IRX) No front panel components.
MX16 (IRX) Connectors for 8 relay output connections (in addition to the 8 on the rear panel).
Rear Panel Components (MX8 and MX16):
RF Receiving antenna: Extends from the rear panel (on RF models only). Extend the antenna vertically
during use.
PWR connector: 2-pin captive-wire connector receives power from the included 12 VDC AC to DC
power module or from a 12 V to 18 V DC, 100 mA min. power source.
IR INPUT connector: 4-pin captive-wire connector for data input from and power output to an IRX-UM+
sensor (for use with IR systems only). Up to four sensors can be connected to this
input.
OUTPUT connectors: 2-pin captive-wire momentary contact relay outputs (eight on the MX8 (IRX) and 16
on the MX16 (IRX)). The MX16 (IRX) has eight outputs on the front panel, in addi-
tion to the eight on the rear panel.
Dimensions (HWD) 1.65" x 5.08" x 5.07" (4.191 cm x 12.903 cm x 12.878 cm)
Weight • MX8 (IRX): 0.70 lb (317.51 g)
• MX16 (IRX): 0.85 lb (385.55 g)
Enclosure Black matte plastic
Included Accessories • PS2.8 power supply
• IRX-DM+ (with MX8-IRX or MX16-IRX units).
Models with an IRX suffix are IR controlled and support up to four AMX external IR
sensors.