AMX MVP-9000i, Руководство по эксплуатации и справочник, Страница: 78 / 202

Protected Setup Pages
64 MVP-9000i 9" Modero® ViewPoint® Touch Panel with Intercom
System Settings Page
The System Settings page (FIG. 72) displays the NetLinx Master’s communication settings. This page contains four tabs:
Master , Wired , WiFi , and USB . Each of these tabs is covered in a separate section.
System Settings - Master
The Master tab controls the method of connection to a NetLinx Master.
The elements of this page include:
FIG. 72 System Settings - Master Tab
System Settings - Master Tab
Back: Saves all changes and returns to the previous page.
WiFi/Wired icon: The icon to the left of the Connection Status Icon displays whether the current
connection to the Master is
Wireless (image of a radio antenna) or Wired
(image of three networked computers).
Connection Status icon: The icon in the upper-right corner of each Protected Setup page provides a
constant visual indication of current connection status.
Note : a Lock appears on the icon if the panel is connected to a secured NetLinx
Master.
Current Connection: Displays the current connection status.
Mode: Cycles between the connection modes: URL , Listen , and Auto .
• URL - In this mode, enter the IP/URL, Master Port Number, and username/
password (if used) on the Master. The System Number field is read-only - the
panel obtains this information from the Master.
• Listen - In this mode, add the panel address into the URL List in NetLinx
Studio and set the connection mode to Listen. This mode allows the Modero
touch panel to “listen” for the Master’s communication signals. The System
Number and Master IP/URL fields are read-only.
• Auto - In this mode, enter the System Number and a username/password (if
applicable). Use this mode when both the panel and the NetLinx Master are
on the same Subnet and the Master has its UDP feature enabled. The
Master IP/URL field is read-only.
System Number: Allows entry of a system number. Default value is 0 (zero).
(Available in Auto Mode Only - disabled when URL or Auto is selected)
Master IP/URL Sets the Master IP or URL of the NetLinx Master.
(Available in URL Only - disabled when Listen or Auto is selected)
Master Port Num.: Allows entry of the port number used with the NetLinx Master. Default = 1319.
NOTE: Both Auto and Listen Modes only support use of port 1319.
Username: If the target Master has been previously secured, enter the alpha-numeric string
(into each field) assigned to a pre-configured user profile on the Master. This
profile should have the pre-defined level of access/configuration rights.
Password: If the target Master has been previously secured, enter the alpha-numeric string
(into each field) assigned to a pre-configured user profile on the Master. This
profile should have the pre-defined level of access/configuration rights.
NDP Name: Displays the name of the device connecting to the Master.