AMX MVP-9000i Скачать руководство пользователя страница 106

Страница: 106 / 202

Protected Setup Pages

MVP-9000i 9" Modero® ViewPoint® Touch Panel with Intercom

SIP Settings Page (Cont.)

STUN Address:

This option enables you to enter the IP address or DNS name of the Simple
Traversal of UDP through NATs (STUN) server. This field is optional.

Local Domain:

This is the realm used for authentication. This field is optional.

User Name:

This option enables you to enter the user name used for authentication to the
proxy server. Normally, the user name is the same as the phone number
assigned to the extension you are using. This field is optional.

Password:

This option enables you to enter the password for the user at the proxy server.
This field is optional.

Cancel/Save:

Touch the

Cancel

button to return to the

Protected Setup

page without saving

any changes made on the

SIP Settings

page. Touch the

Save

button to save

the changes and return to the

Protected Setup

page.

Содержание MVP-9000i











































































































































































































Результаты поиска

Содержание MVP-9000i

Отзывы:

AMX MVP-9000i, Руководство по эксплуатации и справочник, Страница: 106 / 202

Результаты поиска

Содержание MVP-9000i

Отзывы: