manualshive.com logo in svg

AMX MVP-9000i, Руководство по эксплуатации и справочник, Страница: 76 / 202

Поделиться
Скачать
AMX MVP-9000i Скачать руководство пользователя страница 76

Protected Setup Pages

62

 MVP-9000i 9" Modero® ViewPoint® Touch Panel with Intercom

Security Settings

The 

Security

 button on the 

System & Options

 page has three settings: 

Standard

, 

Secure

, and 

DoD

. Pressing the button 

opens the 

Panel Security Setting

 popup window (FIG. 70):

Each of the settings has different features for touch panel security:

For more information on configuring AMX devices for a secure environment, please refer to the guide 

Security Profiles: 

Configuring AMX Devices For Installation Into a Secure Environment

, available at 

www.amx.com

.

FIG. 70  

Panel Security Setting popup window

Security Profile Features

Standard:

• Factory default, shipped in this configuration.

• Default Protected Setup Password is “

1988

”.

• Remote login uses Telnet.

Secure:

• Default Protected Setup Password is “Amx1234!”.

• Minimum password requirement is 8 characters with at least one numeric character.

• Remote login uses SSH.

• Remote login user name is “

amx

”.

• Login failure attempt pauses 4 seconds before another login attempt is allowed.

• After 3 consecutive unsuccessful SSH login attempts, login lockout is enabled for 15 

minutes.

• Login and logout audit logging is enabled.

DoD:

• Default Protected Setup Password is “

Amx1234!

”.

• Minimum password requirement is 8 characters with at least one numeric character, 

one uppercase character, one lower case character, and one special character, with 
no duplicate adjacent characters.

• Remote login uses SSH.

• Remote login user name is “

amx

”.

• Login failure attempt pauses 4 seconds before another login attempt is allowed.

• After 3 consecutive unsuccessful SSH login attempts, login lockout is enabled for 15 

minutes.

• Login and logout audit logging is enabled.

• DoD login banner is enabled.

A transition from one security mode to another will reset the Protected/Web Control/
remote login password to the default value for the current security mode (please refer 
to the default passwords above). A transition to Secure or DoD mode will disable G4 
Web Control. Although the security password features are immediate, a reboot must 
occur for all the new security mode features to take full effect.

Содержание MVP-9000i











































































































































































































Отзывы:

Нет отзывов