manualshive.com logo in svg

AMX MVP-9000i, Руководство по эксплуатации и справочник, Страница: 75 / 202

Поделиться
Скачать
AMX MVP-9000i Скачать руководство пользователя страница 75

Protected Setup Pages

61

 MVP-9000i 9" Modero® ViewPoint® Touch Panel with Intercom

Function Show Example

System & Panel Options Page (Cont.)

Panel Options (Cont.):

Security:

• Displays one of three security settings: 

Standard

, 

Secure

, and 

DoD

. Pressing 

this button opens a popup window allowing changes to the Security Profile. 

NOTE:

 Refer to the 

Security Settings

section on page 62 for very important 

information on using this feature.

Orientation:

• Selects the orientation by which the panel pages are presented: 0° - 

Landscape, 90° - Portrait, and 270° - Portrait.

System Options:

Reset Settings:

• Deletes all of the current configuration parameters on the panel (including IP 

Addresses, Device Number assignments, Passwords, and other presets). 
This option invokes a Confirmation dialog, prompting you to confirm your 
selection before resetting the panel. 

Install Firmware:

• This button allows you to revert the current firmware to factory default, revert 

to the previously installed firmware version, or to install firmware from a 
properly formatted USB thumb drive or microSD card. 

Undock Panel:

• Releases the panel from the Table Docking Station (page 11) or the Wall 

Docking Station (page 14).

Remove Pages:

• Removes all TPD4 touch panel pages currently on the panel, including the 

pre-installed AMX Demo pages. This option invokes a Confirmation dialog, 
prompting you to confirm your selection before removing the panel pages.

• Note that the 

YES

 button on the Confirmation dialog is disabled for 5 

seconds as additional protection against accidentally resetting the panel or 
removing the panel pages.

Install Pages:

• Allows uploading of touch panel pages via USB thumb drive or microSD 

card. If the panel is not connected to a thumb drive or microSD card, this 
button will be blacked out.

USB Ready:

• Notes that the panel is ready to accept files via a USB device.

FIG. 69  

Function Show example 

When the Function Show feature is displayed, the Channel Port and Code will appear 
in yellow, the Address Port and Code in green, and the Level Port and Channel Code 
in purple.

Channel Code

0.20

0,8

0,50

Channel Port

Address Port
Address Code

BUTTON

Level Port

Channel Code

Содержание MVP-9000i











































































































































































































Отзывы:

Нет отзывов