manualshive.com logo in svg

AMX Modero Viewpoint MVP-5200i, Руководство по эксплуатации/справочник

Поделиться
Скачать
AMX Modero Viewpoint MVP-5200i Скачать руководство пользователя страница 178

Battery Life and Replacement

170

MVP-5200i Modero Viewpoint Widescreen Touch Panel

Battery Replacement

The touch panel's battery is intended to last the life of the device, but in cases where the battery has 
reached its effective end of life, it may be replaced with the MVP-BP-5X Battery Pack Kit (

FG5966-27

).

READ THESE INSTRUCTIONS FIRST!

To minimize the risk of damage to the battery during installation, all replacement batteries come in a 
protective metal cover. This cover cannot be removed from the battery.

Replacing the Battery

Before replacing the battery, download and install the latest firmware for the MVP-5200i. This firmware 
is available at www.amx.com.

To remove an old battery and replace it:

1.

Remove the battery from its packaging, remove the protective film from the battery, and inspect it 
for any damage or distortion. If the battery shows evidence of damage, contact AMX for 
replacement and proper disposal information.

2.

Place the device face-down on a surface that will not scratch the unit and remove the five screws 
from the back of the device (FIG. 89).

 

Two of the screws are at the upper corners of the device, underneath rubber feet that also act as 

screw covers. Remove the rubber feet to access the screws.

 

Lift up the kickstand and remove the label to reach the remaining three screws.

3.

Discharge all static electricity that may have built up on your body, either by using a static discharge 
strap or by touching a nearby piece of metal.

IMPORTANT:

 Prior to battery removal, run the device until the battery is completely 

discharged. Do NOT discharge the battery before installing the latest MVP-5200i 
firmware (v2.66.17 or later), available at www.amx.com.

FIG. 89  

Screw placement at the back of the MVP-5200i- GW

Upper screw covers

Lower screws

Kickstand

IR emitter panel

The three bottom screws are shorter than the top two screws. The screws must be 
re-assembled in their original location or the device can be damaged during 
reassembly.

Содержание Modero Viewpoint MVP-5200i











































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды