AMX Metreau DAS-MET-6SRC Скачать руководство пользователя

Страница: 82 / 96

Using the NetLinx Module

Metreau Keypads Instruction Manual

Internal Sirius

Touch

Internal Sirius

to invoke the Device Control page shown in FIG. 90.

The following table lists the option on this page.

FIG. 90

Device Control page - Internal Sirius

Device Control Page - Internal Sirius

Display Window:

Displays the current Channel, Category and Song info (as provided by Sirius).

Channel Up/Down:

Press the Up and Down arrow buttons to browse up/down in the selected Category.

Cat:

Press the Up and Down arrow buttons to browse up/down through the Categories list.

Keypad:

Use the keypad button for direct tuning. Press enter to tune to the specified channel.

Presets:

Use the Presets buttons to recall up to ten station presets.

Zone Options:

Press to access the Zone Options popup for configuring audio settings for the selected Location (Zone).

Note that the currently selected Location is indicated in the upper-right corner of the page (see the

Zone

Options

section on page 80).

Change Source:

Press to access the Sources page for this location. Note that the currently selected Source is indicated in

the upper-left corner of the page (see the

Change Source

section on page 80).

Mute:

Press to mute the audio.

Volume Up/Down:

Press the Up and Down arrow buttons to adjust the volume up/down.

Power On/Off:

Press to toggle the Source device Off/On, in this Zone only. The source device will continue playback in

other Zones.

Display window

Channel

Category Up/Down

Mute

Volume Up

Volume Down

Tuner Presets 1-10

Up/Down

(current Channel/

Category/Song info)

Source On/Off (this Zone only)

Numeric keypad for direct tuning

(press Enter to select

specified station)

Содержание Metreau DAS-MET-6SRC

































































































Результаты поиска

Содержание Metreau DAS-MET-6SRC

Отзывы:

Похожие инструкции для Metreau DAS-MET-6SRC

Бренды по названию

Популярные бренды

AMX Metreau DAS-MET-6SRC, Инструкция по эксплуатации

Результаты поиска

Содержание Metreau DAS-MET-6SRC

Отзывы:

Похожие инструкции для Metreau DAS-MET-6SRC

Бренды по названию

Популярные бренды