Programming
50
Metreau Keypads Instruction Manual
LED Feedback for 2-Position Pushbuttons
The Metreau 7- and 13-button keypads feature a 2-Position pushbutton at the bottom of the button layout (FIG. 42). The button
can be used either as a single button (in which case it functions just like the other buttons), or it can be used as a 2-position
button. In many cases, this button is used as a 2-position button to provide ramp up/down control, for volume, light levels, etc.
On Metreau 7-button keypads, the 2-Position button utilizes button numbers
7
(
left-side
) and
8
(
right-side
).
On Metreau 13-button keypads, the 2-Position button utilizes button numbers
13
(
left-side
) and
14
(
right-side
).
NOTE:
Only the left button provides LED feedback. To achieve LED feedback on the right button, you must toggle feedback on the left
button.
Terminal (Telnet) Commands
Telnet
terminal communication can be accessed remotely via TCP/IP.
Establishing a Terminal Connection via Telnet
1.
In your Windows task bar, go to
Start > Run
to open the Run dialog.
2.
Type
cmd
in the
Open
field and click
OK
to open an instance of the Windows command interpreter - "Cmd.exe" (FIG. 43):
3.
Type "
telnet
" followed by a space and the keypad’s IP address:
>telnet XXX.XXX.XXX.XXX
4.
Press <Enter>.
Without a Telnet password set, a session will begin with a welcome banner similar to the following:
Welcome to SP-08-E-US v1.0.44 Copyright AMX LLC
>
If a Telnet password is set, then user credentials are required:
Enter username:
Enter protected password:
Welcome to SP-08-E-US v1.0.44 Copyright AMX LLC
>
FIG. 42
MET-7 and MET-13 with 2-Position Button
FIG. 43
Windows command interpreter (Cmd.exe)
Metreau 7-button Metreau 13-button
Button #7
Button #8
Button #14
Button #13
