Basic Operations
9
G4 PanelBuilder
Basic Operations
Getting Started
Creating A New Project
The first step towards designing a new *.TP4 file is creating a new project file (*.PB4).
1.
Launch the G4 PanelBuilder application.
2.
Select File > New. This launches the New Project dialog window.
3.
Type the Job Name in the corresponding field.
4.
Select the Panel Type and Resolution from the drop down menus.
5.
Select your desired template family from the thumbnails listed.
6.
After you have clicked on your desired template, click OK.
7.
Your new project is now open to the G4 PanelBuilder Application Interface. A Start element is
in place within the Diagram area.
Adding A Toolbox Element to The Diagram
Once you have a project file open you can add elements to the panel file.
1.
Select the element type within the Toolbox.
2.
Find the desired element, click-and-drag the element to the Diagram area.
If no templates are shown you will need to load them. You can either Install A
Template from File or Install Templates from AMX.com.
If a project is already open and you select open a new or existing project, you are
prompted by the Save As dialog window. The previous project will remain on screen
until you are done setting up the new project.
FIG. 7
Drag a Navigation element to the Diagram area
Содержание G4 PANELBUILDER V1.1
