manualshive.com logo in svg

AMX Enova DVX-3150HD, Руководство по эксплуатации/справочник

Поделиться
Скачать
AMX Enova DVX-3150HD Скачать руководство пользователя страница 17

Overview

4

Enova DVX-3150HD/3155HD All-in-One Presentation Switcher Operation/Reference Guide

DVX-3150HD/DVX-3155HD Specifications (Cont.)

Rear Panel Components: (Cont.)

CONFIG DIP Switch:

8-position Master configuration DIP switch allows setting the Serial Programming 
port baud rate and onboard Master execution mode (PRD or normal). See the 

CONFIG DIP Switch

section on page 29 for more information.

PROGRAM Port:

DB9 connector (male) connects to a DB9 serial port on a PC, for serial 
communication. This connection is used to configure system settings.

Note

: This port is not recommended for firmware updates or large file transfers. Any 

large data-intensive operations are better handled via Ethernet.

See the 

PROGRAM Port

section on page 30 for more information.

ID Pushbutton:

Black ID pushbutton sets the NetLinx Device ID assignments of the Internal Control 
Device. See the 

ID Pushbutton

section on page 31 for more information.

LAN Port:

RJ-45 connector provides TCP/IP communication. See the 

LAN (RJ-45)

section on 

page 31 for more information.

AxLink Port:

1 3.5 mm 4-pin captive-wire connector provides data and power to external control 
devices. The AxLink LED (green) indicates the state of the AxLink port. The AxLink 
port can be used to supply power to downstream AxLink-compatible devices as long 
as the maximum current draw is less than 1 Amp.

Note:

 The AxLink port provides only limited power to connected AxLink devices. It is 

recommended to use an alternate power source when connecting AxLink devices to 
the DVX.

Note: 

When using the DVX with the NXA-PDU-1508-8 power distribution unit, do 

NOT c12V power from any of the NXA-PDU's AxLink ports to the AxLink 
power pin.

See the 

AxLink Port and LED (4-pin captive-wire)

section on page 32 for more 

information.

Power Connector:

IEC Power cord connector: 100-240V AC, 47-63Hz

Operating 
Environment:

• Storage temperature: -10º C to 70º C (14º F to 158º F)

• Operating Temperature: 0º C to 40º C (32º F to 104º F)

• Operating Relative Humidity: 5% to 85% non-condensing

Supported Video 
Resolutions:

HD resolutions up to 1080p and RGB resolutions up to 1920x1200@60Hz. Higher 
resolutions are supported in pass-through mode. See the 

Available Pixel Display and 

Refresh Rates

section on page 113 for a complete listing of all supported video 

resolutions.

Dimensions (HWD):

5 3/16" x 17" x 14" (13.2 cm x 43.2 cm x 35.6 cm)

Weight:

18.2 lb (8.26 kg)

Enclosure:

Metal with black matte finish

Certifications:

• FCC Part 15 Class A

• IC CISPR 22 Class A

• C-Tick CISPR 22 Class A

• CE EN 55022 Class A and EN 55024

• LVD EN 60950-1

• IEC 60950-1

• cULus UL 60950-1

Содержание Enova DVX-3150HD






































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды