Upgrading The Firmware
45
AXP-PLV PosiTrack Pilot Video Camera Controller
1.
Obtain the IP Address of the NetLinx Master from your System Administrator, if you do not
have an IP Address for the Master:
Follow steps outlined in the
NetLinx Studio
Instruction Manual for either Obtaining or
Assigning and IP Address.
From the Online tab of the Project Navigator window, select the NetLinx Master.
Press the
Get IP
button from the
Tools
>
NetLinx Diagnostics
>
Networking
tab >
IP Address
section. Note the IP Address and Gateway information.
2.
Select
Tools
>
Master Communication Settings
from the Main menu.
3.
Press the
NetLinx
radio button from within the Platform section of the Communication
Settings dialog box (FIG. 19).
4.
From the Communications Port drop-down list, choose
Network
. This indicates the
IP Address on the master is being reached from within a network connection.
5.
Enter the IP Address information displayed on the
Networking
tab.
Do not alter the defaulted
IP port.
6.
Click the
OK
button to end the process of obtaining and assigning the IP Address to the
NetLinx Master.
7.
Select
Edit
>
Preferences
, from the
General - Communications
section
8.
Select the
Enable Online Tree
option to view the Connected devices from within the Project
Navigator window. The next step is to set the System value.
9.
After the Communication Verification dialog window verifies active communication between
the PC and the Master, verify the AXP-PLV Color Touch Panel appears in the Online tab of the
Project Navigator window (FIG. 20).
The internal AI8 is assigned a virtual device number and the AXP-PLV is assigned two (2)
device numbers. This results in the appearance of 3 devices in the Project Navigator window
(1 Analog Interface and 2 color panels).
Refer to the
NetLinx Programming
Instruction Manual for more detailed information about the
Online tab and the communication procedures described above.
FIG. 19
Communication Setting tab
Enter an IP Address
Содержание AXP-PLV
