AMX AXP-PLV, Инструкция по эксплуатации

Страница: 26 / 54

Programming
22
AXP-PLV PosiTrack Pilot Video Camera Controller
System Send_Commands (Cont.)
DBEEP
Gives a double
beep output.
This command only works if the Double Beep value in the Protected Setup page is set to
ON.
Syntax:
"’DBEEP’"
Example:
SEND_COMMAND TP,"’DBEEP’"
Double beeps the panel.
ILEV
Inverts the joystick
axis.
Syntax:
"’ILEV <joystick axis to invert>’"
Variables:
joystick axis to invert =
0 = Normal G3 joystick (origin: top left)
1 = Invert horizontal axis (origin: top right)
2 = Invert vertical axis (origin: bottom left)
3 = Invert both axes (origin: bottom right)
Example:
SEND_COMMAND TP,"’ILEV 3’"
Inverts the joystick axis to move the origin to another corner.
Note : This command applies to joysticks drawn on touch panel pages. It does not apply to
the physical joystick in the PLV controller.
PAGE
Flips to page with
specified page
name.
Syntax:
"’PAGE-<page name>’"
Variables:
page name = 1 - 50 ASCII characters
Example:
SEND_COMMAND TP, "’PAGE-MAIN PAGE’"
Flips the touch panel to the page named MAIN PAGE.
PKEYP
Displays aster-
isks (*) for keypad
entries.
Syntax:
"’PKEYP-<number string>’"
Variables:
number string = 0 - 9999
Example:
SEND_COMMAND TP, "’PKEYP-1988’"
Displays the touch panel keypad with **** instead of 1988.
PPOF
Closes a specific
popup page.
Syntax:
"’PPOF-<page name>’"
Variables:
page name = 1 - 50 ASCII characters
Example:
SEND_COMMAND TP,"’PPOF-Popup Page 1’"
Closes Popup Page 1.
PPON
Opens a specific
popup page.
Syntax:
"’PPON-<page name>’"
Variables:
page name = 1 - 50 ASCII characters
Example:
SEND_COMMAND TP,"’PPON-Popup Page 1’"
Opens Popup Page 1.