AMX AXD-CV6 Скачать руководство пользователя

Страница: 23 / 54

Designing Touch Panel Pages

6" Color Video Wall Panel

Go through each option and set as desired:

TEXT OFF

and

TEXT ON

sets the text for the button's Off and On state.

ICON OFF

and

ICON ON

sets the icon for the button's Off and On state.

BITMAP OFF

and

BITMAP ON

sets the bitmap for the button's Off and On state.

MAKE ON SAME AS OFF

sets the On and Off properties the same.

Press

EXIT SAVE CHANGE

to close the Text/Image page and return to the Main page.

Using TPDesign3 to Download Bitmaps, Icons, and Fonts

TPDesign3 allows you to download bitmaps, icons, and fonts into your touch panel from an

existing touch panel program. Refer to the

TPDesign3 Touch Panel Program

instruction manual for

more information. Use the

Download to Panel

button to download a project file.

To download bitmaps, icons and/or fonts from an existing TPDesign3 project file:

Launch the TPDesign3 software program and open a project file that contains the desired

bitmaps, icons, and fonts.

Select

File

from the menu bar to open the File menu.

In the File menu, click on

Download to Panel

, this opens the Download to Panel dialog box.

Click on the Comm Settings tab to set the communications port, baud rate, and other settings.

Then, click the Actions tab to set the communication mode and select which elements of the

project file you want to download to the touch panel.

In the What To Send area, select one or more of the available options (All Bitmaps, All Icons,

All Fonts).

Select the mode of communication with the touch panel (RS-232 and AXlink). Confirm that

the correct panel is selected by verifying the ID values with the Base Address assigned to the

touch panel in the Protected Setup page.

After clicking

Connect

, the Available Panels list appears in the Available Panels field. Click

Begin

to start downloading the project file into the panel.

After completing the download, the bitmaps, icons and fonts that were downloaded are now

accessible via the BITMAPS, ICONS and FONTS menus.

Creating a Bargraph and Joystick

Bargraphs are level monitors and adjustable level controls. These levels can be configured to

monitor and adjust audio outputs and lighting levels.

Joysticks are vertical and horizontal direction controllers you can use for camera for pan and tilt

control. Before starting, make sure to connect the touch panel to your Controller; otherwise, the

joystick will not work properly.

You cannot create or edit buttons with Unicode fonts on the panel. Any use of the
TEXT/IMAGE button to alter or create Unicode font supported buttons must be done
in the TPDesign3 Touch Panel Design Program.

Содержание AXD-CV6























































Результаты поиска

Содержание AXD-CV6

Отзывы:

Похожие инструкции для AXD-CV6

Бренды по названию

Популярные бренды

AMX AXD-CV6, Инструкция по эксплуатации

Результаты поиска

Содержание AXD-CV6

Отзывы:

Похожие инструкции для AXD-CV6

Бренды по названию

Популярные бренды