27
A
Meter, Base Container, and Cradle Installation:
For easier installation, mount
the meter to the base container before installing the base container in the cradle.
Note:
These instructions are for initial meter installation. For meter replacement, see
instructions in Section D of this manual. Always use a new meter gasket when
installing or replacing the SmartBox
®
meter.
Meter to Base Container:
Base Container to Cradle:
Figure 10
Figure 11
Figure 12
1. Position the meter with the 45° meter discharge
opening facing toward the planter row in which
the chemical will flow to. (Rear mounted systems
will have the meter facing forward toward the
tractor.) See your bracket information for the
orientation of the meter for front mount systems
and ladder mount rows.
2. Ensure the gasket and meter screen are properly
installed on the meter.
NOTE: Always use a
new gasket when replacing a meter.
3. Place the 1/4" x 1" bolts up through the meter,
base container flange, and washer. Lightly
secure with the lock nuts (see Figure 10).
4. Tighten all bolts securely. Torque all bolts to 25 –
30 in-lbs.
NOTE: Do not over-tighten or under-
tighten bolts; meter-to-base gasket must be
compressed 60% -75% for proper sealing.
Over-tightening can cause the meter-to-base
gasket to tear.
5. Once the meter has been secured to the base
container apply a thin layer of silicone caulk to the
outside edge of the gasket seal.
1. For rear mounting orient the base container into
the cradle (see Figure 11). (The base container
can be mounted in the cradle facing forward or
backward. See your bracket information when
additional brackets are used.)
2. Loosely secure the base container to the cradle
using the 1/4" x 1/2" bolts with washers. Tighten
all bolts securely.
Note: Do not over-tighten or
under-tighten bolts: Torque all bolts to 25-30
in-lbs.
Содержание SmartBox
