30
degrees)
4.
Outdoor humidity offset calibrated (range +/-10%)
5.
Absolute pressure offset calibrated (range +/-50hpa)
6.
Wind direction offset calibrated (adjust by degree)
7.
Wind speed factor adjust, default 100% (range 50% to 150%)
8.
Rain factor adjust, default 100% (range 50% to 150%)
9.
Light factor adjust, default 100% (range 30% to 250%)
10. UVI factor adjust, default 100% (range 30% to 250%)
6.8 Other Features
6.8.1 Factory Reset/Clear Memory
To restore the console to factory default, perform the following steps:
1.
Remove the power from the console by removing the batteries and
disconnecting the AC adapter.
2.
Apply power by connecting the AC adapter.
3.
Wait for all of the segments to appear on the screen,.
4.
Press and hold the
WIND/+
and
PRESSURE/-
keys at the same time
until the console power up sequence is complete (about 5 seconds).
5.
Replace the batteries.
6.8.2 Register New Transmitter
Press and hold the
LIGHT /SNOOZE
button for 5 seconds, and the console
will re-register the wireless sensor.
6.8.3
Backlight (constant backlight requires operation with AC
adapter.)
1)
With AC adaptor.
The backlight can only be continuously on when the AC adapter is
permanently on. When the AC adapter is disconnected, the backlight can
be temporarily turned on.
Press the
LIGHT SNOOZE
key to adjust the brightness between High, Low
and Off.
2)
Without AC adaptor
